활성탄 필터 범위 배기 모터 덕트리스 미니 모바일 스테인레스 캐비닛 불화수소산 증기 후드
개요 패키지 크기 1900.00cm * 900.00cm * 2100.00cm 패키지 총 중량 360.000kg 제품 설명 흄 후드는 실험실 작업자에게 안전하고 기능적인 작업 공간을 제공해야 하며 다음과 같습니다.
Overview 기본정보
모델 번호. | APL-H21 |
특징 | 내식성, 내열성, 내산성 및 내알칼리성, 내화성, 폭발 방지 |
후드 유형 | 기준 |
색상 | 회색 |
맞춤형 | 맞춤형 |
상태 | 새로운 |
입력 전원 | 110V-240V |
필터 | 370*395*50mm |
애플리케이션 | 환경/연구소/생물학 연구실/화학 연구실 |
면 속도 | 0.4-0.6M/S |
라이너 소재 | 세라믹 섬유판 |
허리띠 | 강화 유리 |
작업대 | 20+6mm 세라믹 |
상품명 | 덕트리스 흄후드 |
운송 패키지 | 표준 수출 나무 케이스 포장 |
사양 | 1600*620*1245MM |
등록 상표 | 앰플 |
기원 | 중국 청두 |
HS 코드 | 8414809090 |
생산 능력 | 200 세트/달 |
포장 및 배송
패키지 크기 1900.00cm * 900.00cm * 2100.00cm 패키지 총중량 360.000kg100 °F) impose a fire hazard when stored/used improperly. The most common fume hood safety hazards that arise in laboratories stem from cluttered workstations, improper chemical storage, chemical fume hood incompatibility, and failure to check the hood flow indicator to make sure that it is working properly before starting work. brWhen choosing a ducted or ductless system, it is important to get all of the necessary components to maintain good lab practices. Cabinets are available for regular, solvent (flammable and combustible), and corrosive (acids or bases) storage. Some cabinets are designed without a bottom for easy access to equipment that can be rolled into and out of the cabinet. If storage is not necessary, simple base stands or carts (for portable hoods) are available to elevate and support the hood and work surface.brWork surfaces vary in composition, abrasion, chemical, and heat resistance. Solid epoxy resin work surfaces provide the highest-level resistance, allowing users to perform tasks with high concentrations of solvents, acids, and bases. Solid phenolic resin stations are intended for high chemical resistance, but are not as hard and durable as epoxy stations. Stations made of composite resin provide the least amount of chemical resistance and are intended for general use only. Stainless steel work surfaces are also available for perchloric acid and radioisotope fume hoods, both of which require ducted exhaust.br All work surfaces can be purchased with or without spill containment for extra protection, and with cutouts for cup or trough sinks. However, the more plumbing that a hood requires, the less feasible portability becomes. Sinks would likely be plumbed to acid waste systems, and if gas, compressed air, N2, or vacuum turrets are necessary, then disconnecting and reconnecting the unit to move it becomes more of a bother./pProduct Parameters table>|
| |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |